Summer heat is here, it's time to flush your system and rinse your filter.
Each year intense summer heat kills thousands of plants unnecessarily . Often it is simply caused by a lack of required annual maintenance. If you notice your plants looking limp this summer and turning yellow or brown while dropping leaves or foliage, it's time to rinse out the filter and check the water flow at the wilting plant.
Your first step is to open the underground irrigation box and locate the plastic filter cap. Unscrew the cap, pull out the filter and rinse under cold water until clean of all debris. Replace the filter and cap.
This should be done twice per year.
Next, head over to the wilting plant or plants and locate the drip emitter. Pull the emitter from the drip line and turn on the system. Let the water run for a minute or so to flush out any debris. Now push the emitter back into the drip line and check for water flow. If no water is being delivered to the wilting plant, its time to replace the emitter head.
If you are not the do-it-yourself handy type. We are only a phone call, email or text away to complete the required maintenance to save your plants.
Don’t starve your plants, give them a sip with a long slow drip.